Desain Konseptual Penangkap Tandan Buah Sawit dan Pemanfaatan Energi Potensialnya

Wawan Hermawan, Desrial ., Muhammad Iqbal Nazamuddin, Rusnadi .

Abstract

Abstract
In oil palm harvesting, falling fruit bunches have a considerable potential energy, which can be captured and used to power the wheelbarrow in evacuating the fruit bunches. This study was conducted to measure
the engineering characteristics of fruit bunches harvesting, determine the best fruit bunches catchment platform material, analyze the potential energy of falling fresh fruit bunch, and design a conceptual design
of the catchment platform and evacuation machine. Measurements of the characteristics of the harvesting were done in an oil palm plantation. Four types of fruit catchment platform materials were tested, namely:
steel plate, wood board, expanded steel plate and rubber sheet. The results showed that, bunches fell at a distance between 0.6 m to 1.4 m from the tree. Fruit bunches weight was in the range of 16 kg to 32 kg.
The rubber catchment platform was superior to the other materials in reducing the scattered loose fruits and bruised fruits. Potential energy of falling fruit bunches were in the range of 0.44-4.44 kJ. Theoretical
traveling distance of the wheel barrow powered by the captured potential energy was in the range of 2.27 m - 22.98 m. Based on the data obtained, a conceptual design of catchment platform and evacuation machine
was designed.
Keywords: oil palm harvesting, engineering characteristics, potential energy, catchment platform,
conceptual design.

Abstrak
Dalam panen kelapa sawit, tandan buah yang jatuh memiliki energi potensial yang cukup besar, yang dapat ditangkap dan digunakan sebagai daya penggerak angkong dalam mengevakuasi tandan buah segar
(TBS). Penelitian ini dilakukan untuk mengukur karakteristik teknik panen TBS, menentukan bahan landasan terbaik untuk penangkap TBS, menganalisis potensi energi potensial TBS yang jatuh, dan merancang
desain konseptual dari mesin penangkap dan pengangkut TBS. Pengukuran karakteristik panen dilakukan di perkebunan kelapa sawit. Empat jenis bahan landasan tangkapan diuji, yaitu: pelat baja, papan kayu, pelat baja expanded dan lembaran karet. Hasil penelitian menunjukkan bahwa, tandan jatuh pada jarak antara 0.6 m sampai 1.4 m dari pohon. Berat TBS berkisar antara 16 kg sampai 32 kg. Bahan karet paling baik untuk penangkap TBS dalam mengurangi jumlah buah tercecer dan buah memar. Energi potensial TBS jatuh berada di kisaran 0,44-4,44 kJ. Jarak tempuh teoritis dari angkong yang menggunakan energi
potensial yang ditangkap, berada di kisaran 2.27 m - 22.98 m. Berdasarkan data pengukuran, sebuah desain konseptual mesin penangkap dan evakuasi TBS telah dirancang.
Kata kunci: panen kelapa sawit, karakteristik teknik, energi potensial, landasan tangkapan, desain konseptual.

Diterima: 24 Mei 2013; Disetujui: 27 Agustus 2013

Authors

Wawan Hermawan
w_hermawan@ipb.ac.id (Primary Contact)
Desrial .
Muhammad Iqbal Nazamuddin
Rusnadi .
Author Biographies

Wawan Hermawan

Departemen Teknik Mesin dan Biosistem, Fateta IPB

Desrial .

Departemen Teknik Mesin dan Biosistem, Fateta IPB

Muhammad Iqbal Nazamuddin

Departemen Teknik Mesin dan Biosistem, Fateta IPB

Rusnadi .

Departemen Teknik Mesin dan Biosistem, Fateta IPB
HermawanW., .D., NazamuddinM. I., & .R. (2015). Desain Konseptual Penangkap Tandan Buah Sawit dan Pemanfaatan Energi Potensialnya. Jurnal Keteknikan Pertanian, 1(1). https://doi.org/10.19028/jtep.01.1.%p

Article Details

Most read articles by the same author(s)

<< < 1 2 3 > >>