Sifat Optik dan Energi Gap Film Ferroelektrik LiTaSiO5 di Atas Substrat Silikon
AbstractLithium tantalate silicate (LiTaSiO5) has successfully been made on Si (100) p-type and Si (111) n-type by chemical solution deposition (CSD) technique with temperatures variation of 600, 650, 700, 750, and 800 oC. Determined the film thickness as well as and test the optical properties with UV-Vis spectroscopy. The maximum absorbance of the substrates were 420 and 980 nm. The maximum band of films on Si (100) was 2.94 eV a temperature of 650 oC and Si (111) was 3.06 eV a temperature of 800 oC
Gonzalez AHM, Simoes AZ, Zaghete MA, Varela JA. 2003. Effect of preannealing on the morphology of LiTaO3 thin films prepared from the polymeric precursor method. Materials Characterization. 50(2-3): 233-238. http://doi.org/bfzvkt
Iriani Y, Hikam M, Irzaman. 2005. Analisa Struktur Kristal dan Komposisi Tipis Ba0,5Sr0,5TiO3 yang disiapkan dengan spin coating – 3th. Kentingan Physics Forum. 125-127.
Irzaman, Darvina Y, Fuad A, Arifin P, Budiman M, Barmawi M. 2003. Physical and pyroelectric properties of tantalum oxide doped lead zirconium titanate [Pb0.9950(Zr0.525 Ti0.465 Ta0.010)O3] thin films and its applications for IR sensor. Physica Status Solidi (a). 199(3): 416-424. http://doi.org/bv9jgw
Irzaman, Maddu A, Syafutra H, Ismangil A. 2010. Uji konduktivitas listrik dan dielektrik film tipis lithium tantalate (LiTaO3) yang didadah niobium pentaoksida (Nb2O5) menggunakan metode chemical solution deposition. Di dalam: prosiding seminar nasional fisika. hlm 175-183.
Irzaman, Syafutra H, Rancasa E, Nuayi AW, Rahman TbGN, Nuzulia NA, Supu I, Sugianto, Tummimomor F, Surianty, Muzikarno O, Masrur. 2013. The Effect of Ba/Sr ratio on Electrical and Optical Properties of Bax Sr(1-x) TiO3(x = 0,25; 0,35; 0,45; 0,55) Thin Film Semiconductor. Ferroelectrics. 445(1): 4-17. http://doi.org/bqhx
Irzaman, Pebriyanto Y, Apipah ER, Noor I, Alkadri A. 2015. Characterization of Optical and Structural of Lanthanum Doped LiTaO3 Thin Films. Integrated Ferroelectrics. 167(1): 137-145. http://doi.org/bqhz
Ismangil A, Jenie RP, Irmansyah, Irzaman. 2015. Development of lithium tantalite (LiTaO3) for automatic switch on LAPAN-IPB satelite infra-red sensor. Procedia Enviromental Sciences. 24: 329-334. http://doi.org/bqh2
Seo YJ, Park SW. 2004. Chemical Mechanical Planarization Characteristic of Ferroelectric Film for FRAM Applications. Journal of Korean Physics society. 45(3): 769-772.
Setiawan A. 2008. Uji sifat listrik dan optik BST yang didadah niobium (BSNT) ditumbuhkan di atas substrat Si (100) tipe-p dan gelas corning dengan penerapannya sebagai fotodiode. [Skripsi]. Bogor (ID): Institut Pertanian Bogor.
Smallman R, Bishop R. 1999. Modern Physics Metallurgy and Materials Engineering. Oxford (GB): Butterworth-Heinemann.
Yan T, Zheng F, Yu Y, Qin S, Liu H, Wang J, Yu D. 2011. Formation mechanism of black LiTaO3 single crystal through chemical reduction. Journal of Applied Crystallography. 44(1): 158-162. http://doi.org/fqfbp3
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. NonCommercial — You may not use the material for commercial purposes.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).