Acid and calcium alginate extraction method affected the quality of alginate from brown seaweed Sargasum hystrix J. Agardh

Ivana M. Diharningrum, Amir Husni

Abstract

Seaweed is one of the marine biological resources of Indonesia that has a high potential to produce alginate, however, the most appropiate method to extract the alginate of high quality is still unknown. This study was aimed to determine the effects of extraction methods on the quality of alginate from seaweed Sargassum hystrix and compared the extraction cost. Two extraction methods were used in this study including acidic and calcium method. The yield, moisture content, viscosity, pH, whiteness degree, functional group, ash content and extraction cost were evaluated. The viscosity and whiteness degree of sodium alginate from acidic method was 126.00±7.21 cPs and 75.27±0.58 cPs, respectively. Meanwhile the calcium method produced sodium alginate with viscosity 7.23±1.50 cPs and whiteness degree 68.95±0.18 cPs. The yield, moisture content, and ash content of alginate produced by acidic method were lower compare to that of produced by calcium method. Cost analysis showed the acidic method required higher cost. Nevertheless, these resultssuggest that acidic method produce alginate with better quality than the calcium method.

Authors

Ivana M. Diharningrum
a-husni@ugm.ac.id (Primary Contact)
Amir Husni
DiharningrumI. M., & HusniA. (2018). Acid and calcium alginate extraction method affected the quality of alginate from brown seaweed Sargasum hystrix J. Agardh. Jurnal Pengolahan Hasil Perikanan Indonesia, 21(3), 532-542. https://doi.org/10.17844/jphpi.v21i3.24737

Article Details