Ciri Bilah Bambu dan Buluh Utuh pada Bambu Tali dan Bambu Ampel
Abstract
Bamboo is a natural resource that can be used as a basic commodity to substitute wood. To determine the use of a basic commodity, it is needed to study the basic characteristic of bamboo, in terms of anatomy, physical, and mechanical properties. Some studies of this topic, especially for engineering purpose, have been done, but the most of them used sample experiment in the form of bamboo culm. Therefore, it is necessary to find out whether experiments using bamboo strip are equivalent with the value of bamboo culm. This study used tali and ampel bamboos. The anatomy observation followed the Manual of Anatomy Practical Work and Wood Identification by Pandit (1991) and Nuryatin (2000), tests were based on Nuryatin’s study (2000). Sample tests for mechanical properties were based on ASTM D 143-94 and modification of ISO 22157-1:2004. The results showed that physical properties of internode of tali bamboo were inferior than that of the node, in contrary to ampel bamboo, which was better than that of the node. For all mechanical properties, internodes of tali and ampel bamboos were better than that of the node. The modulus of elasticity of the bamboo culm was lower 110% than that of the bamboo strip and the modulus of rupture of the bamboo culm was lower 230% than that of the bamboo strip. On the other side, τTk// of the bamboo culm was 15% higher than that of the bamboo strip.
Downloads
References
ASTM. 2008. Standard Methods of Testing Small Clear Specimens of Timber. Serial Designation D 143-94. ASTM. Philladelphia (US).
Bachtiar G. 2008. Pemanfaat buluh bambu tali sebagai komponen pada konstruksi rangka batang ruang. [Disertasi]. Bogor (ID): Institut Pertanian Bogor.
Damayanti E. 2006. Sifat fisik dan mekanik bambu untuk penajo pada sero do Tanjung Pasir Tangerang. [Skripsi]. Bogor (ID): Institut Pertanian Bogor.
Dransfield S, Widjaja EA. 1995. Plant Resources of South East Asia (PROSEA) No.7: Bamboos. Leiden (NL): Backhuys Publisher.
Habib. 2010. Bambu. http://habib00ugm. wordpress.com/2010/06/05/bambu/ [diunduh 2012 Mar 16].
ISO 22157-1: 2004 (E). Laboratory Manual on Testing Methods for Determination of physical and mechanical properties of bamboo. Swiss (CH).
Krisdianto, Sumarni G, Ismanto A. 2007. Sari hasil penelitian bambu. http://www.dephut.go.id/ index.php?q=id/node/1241 [diunduh 2012 Mar 22]
Lestari B. 1994. Hubungan sifat anatomi terhadap sifat fisis dan mekanis bambu betung (Dendro-calamus asper Backer). [Skripsi]. Bogor (ID): Institut Pertanian Bogor.
Liese W. 1980. Anatomy of bamboo. In: Proceedings of Workshop on Bamboo Research in Asia. Singapura, 28-30 Mei 1980.
Nuryatin N. 2000. Studi analisis sifat-sifat dasar bambu pada beberapa tujuan penggunaan [Tesis]. Bogor (ID): Institut Pertanian Bogor.
Pandit IKN. 1991. Anatomi, Pertumbuhan, dan Kualitas Kayu. Bidang Studi Ilmu Pengetahuan Kehutanan. Fakultas Pasca Sarjana. Institut Pertanian Bogor. Bogor (ID).
This journal is published under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License. Authors who publish with this journal agree to the following terms: Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. NonCommercial — You may not use the material for commercial purposes.
View JIPI StatsCounter
